madbeanpedals VFE Switching Board, Руководство пользователя

Страница: 7 / 9

7
Lock washer soldered to the DC Jack sleeve.
For convenience, I have created a MOUSER project for the Switching Board components. It includes ALL options, so be
sure to remove the items you don’t need. Note:
It does not include the momentary switch .
8.7 update: Mouser appears to no longer stock the low-ESR 47uF caps originally listed. I have replaced those in
the project link with 10uF and 22uF low-profile/low ESR caps. You can use either one (qty 2) depending on what
is in stock.
Momentary Switch
VFE uses this switch in their pedals:
http://smallbear-electronics.mybigcommerce.com/110-pm-off/
- These are more expensive, but are very rugged. They are momentary but provide a “click” when pressed.
Regular soft touch momentary are less expensive and will work fine:
http://smallbear-electronics.mybigcommerce.com/momentary-spst-no-soft-touch/
If you want to go really cheap, I have also tested these and they seem to work okay:
http://bitcheslovemyswitches.com/#!/SPST-Soft-Touch-Momentary-Footswitch-Normally-
Open/p/10220659/category=5027572
I do not have the code to program the micro-controllers. This is proprietary to VFE.
Mouser Project: VFE_SwitchingBoard
http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=b1a505584d
TIP: If you’d like to learn more about soft-bypass switching, check out these terrific tutorials available at Code Effects
http://www.coda-effects.com/2016/04/relay-bypass-conception-and-relay.html
http://www.coda-effects.com/2017/02/relay-bypass-final-code.html