11
IT
EN
FR
ES
Special conditions for safe use
The “X” symbol (positioned at the end of the protection mode) indicates particular conditions of use:
• Clean the product regularly with an antistatic cloth to prevent dust from building up and the formation of electrostatic charges;
• It must be installed in places at a low risk of mechanical impact;
• Keep ambient humidity under control to minimise the formation of electrostatic charges;
• Protect the device from direct air draughts that could cause the accumulation of electrostatic charges;
• Sparks caused by impact or friction on light metals can cause sources of ignition, therefore tools with corroded surfaces
must not be used under any circumstances (e.g. for adjustments, maintenance, etc.);
• Protect the product from impact or friction caused by other objects;
• Do not install in environments where the product is in direct contact with corrosive gases, chemicals, salt water, water or
steam (C3 or medium degree of environmental pollution). Contact the technical department for any other application, for
the compatibility analysis;
