Thank you for buying the
Loud’n Proud!
One of the most iconic amplifiers: vintage 4-input Marshall, that is
based on a Fender Bassman amplifier actually, just has that classic
guitar tone. That rebellious rock tone we all have grown to love
from recordings of the bands and artists like AC/DC, Cream, Jimi
Hendrix, Led Zeppelin, Free, Yngwie Malmsteen etc.
Mad Professor Loud´n Proud
is a vintage 4-input Marshall in a
box. It is a compact pedal with a complete amp signal path repli-
cated inside. Not only the preamp but also the power amp contain-
ing phase inverter, push-pull stage and also the output transformer
simulation. This internal structure makes the pedal not only sound but
also behave like a real amp.
And like a vintage Marshall amp, the pedal has a moderate amount
of gain. This is what led us into adding a boost/fuzz to this medium
gain overdrive circuit. The pre boost has capability of pushing
13dB. This will add a nice amount of gain to the pedal. It also thick-
ens the midrange a bit so feel free to experiment with the boost
also for a different voicing for the overall tone of the pedal.The fuzz
is designed to work like a vintage germanium fuzz. By engaging
the fuzz you can find a great variety of tones from a clean tone to a
thick and warm fuzzy tones just by rolling the guitar volume.
The vintage germanium fuzz into a plexi Marshall is a classic tone
that we absolutely wanted to include to the Loud´n Proud pedal!
You will also find a switch for two different character voicings in the
Loud´n Proud pedal: tighter bass and a bit compressed tone on the
left and a looser bass with the maximum dynamics on the right.
If you are familiar and love the vintage Marshall amp tone, that is a
very recognizable tone from many classic recordings, you will also
love this pedal as it is a real deal for those who dare!
CONTROLS:
s"!33
Adjusts the amount of the low frequencies.
s-)$$,%
Adjusts the amount of the mid frequencies.
s42%",%
Adjusts the high frequency amplification in the preamp
section.
s
'!).
Adjusts the amount of distortion.
s6/,5-%
Sets the output level.
s02%3%.#%
Adjusts the high frequency amplification in the
power amp section by changing high frequency feedback.
s&5::6/,
Sets the output level of the fuzz.
s"//34&5::
Adjusts the amount of the boost or the fuzz.
s#(!2!#4%237)4#(
Tighter bass and a bit compressed
sound on the left and a looser bass with maximum dynamics on
the right.
s&5::"//3437)4#(
Chooses between the fuzz or the
boost circuits.
# ! 5 4 ) / .
Never operate the unit with its bottom removed or damage will
most likely occur.
%,%#42)#!,30%#)&)#!4)/.3
s#URRENTCONSUMPTIONM!AT6$#
s3UPPLYVOLTAGE6$#
s)NPUTIMPEDANCEK/HMFOR$ISTORTION"OOSTANDK/HM
for Fuzz
s/UTPUTIMPEDANCEK/HM
s#OMPLETEBYPASSTRUEBYPASS
s0OWERREQUIREMENTSF6BATTERYOR$#ELIMINATORMM
plug, center negative and positive sleeve
./4%3
Loud´n Proud is protected against wrong eliminator polarity.
Use recommended voltage for best results.
The manufacturer claims that the above mentioned product
FULlLLSTHEREQUIREMENTSASSETBYENENEN
ANDEN2O(SAND7EE
-AD0ROFESSORPEDALSCARRYAYEARLIMITEDWARRANTY
MAD PROFESSOR - LOuD’n PROuD - OWnER’S MAnuAL
