Package Cotents:
Place the Mount
Open the C-clamp on the bottom of the mount by turning the clamp knob
counter clockwise. Tighten the clamp knob to secure on mounting area.
Attach the Holder
Attach a holder to the C-clamp mount by inserting the Dual-T tabs into
the holder and sliding the holder down to lock.
1.
2.
3.
4.
Mount a Tablet
Insert tablet into holder by pushing down the bottom spring-loaded
support legs with the tablet. Slide the top of the tablet under the top
Adjust the Mount
C-Clamp Knob
Clamp
Bracket
C-Clamp
Package Contents:
(1) HD004 - 10” Heavy Duty Aluminum C-Clamp Mount
(1) TAB001 - Universal Tablet Holder
Consumer Hotline:
USA
(800) 841-0884
INT’L
(626) 254-9005
Monday - Friday 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Made in China and Taiwan
© Copyright 2011 Arkon Resources, Inc.
The Mobile Mounting Specialists™
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
!
Rev. 111011
HD004
10” Heavy Duty Aluminum
C-Clamp Mount
Adjust the Mount
4
Attach a holder to the C-clamp mount by inserting the Dual-T tabs into the
holder and sliding the holder down to lock.
Open the C-clamp on the bottom of the mount by turing the clamp knob
counter clockwise. Tighten the clamp knob to secure on mounting area.
Attach the Holder
Place the Mount
2
Dual-T Head
Universal Tablet Holder
1
Adjust the C-clamp mount position by loosening the joint
adjustment knobs and retightening in the desired position.
C-Clamp
C-Clamp Knob
Joint Adjustment
Knob
Head Adjustment Knob
Mount a Tablet
3
Push down
Insert tablet into holder by pushing down on the bottom spring-loaded
support legs with the tablet. Slide the top of the tablet under the top
TAB00
Slim-Grip® Universal 1
Tablet Holder
B
en
d
to
A
dj
us
t
Tightening Ring
Attach holder
to mount
Push down on
legs to insert tablet
Adjust the position of the mount by firmly bending the neck.
Ball head can also be adjusted via the tightening ring.
GN086-12-SBH
Heavy-Duty
Adjustable C-Clamp
Mount with 12”
Flexible Gooseneck
