18
CLEANING AND MAINTENANCE
Use a lightly dampened cloth of soft material to clean the device. The interior of the device can be cleaned
with compressed air, using it at a distance of more than 5 cm.
When not in use, store the device in its original packaging to protect it from dust and moisture.
During transport, the RF receiver should be placed in its dedicated location, which can be accessed after
removing the rear cover
PLEASE NOTE! DO NOT IMMERSE THE DEVICE IN WATER. DO NOT USE WATER OR CHEMICALS FOR CLEANING.
PROBLEMY I ROZWIĄZANIA
Problem
Possible cause
Solution
The device does not
start.
Incorrectly connected plug to the computer
connector.
Connect the plug to the connector on the
computer correctly.
The computer has not installed the device
driver.
Connect the cable plug to the USB connector
on the computer and wait for the device
driver to be installed.
The mouse cursor
moves very fast or very
slowly.
Too high or too low DPI resolution set.
Change the DPI resolution by pressing the
DPI change button.
The mouse cursor
freezes or does not
move.
The optical hole at the bottom of the mouse
is dirty.
Clean the underside of the mouse.
The texture of the surface on which the mouse
works negatively affects the sensor operation.
It is recommended to use a mouse pad.
After a long time without activity, the mouse will
go to standby.
Press any mouse button to wake up the
device.
Unable to connect
mouse to computer.
No USB-A port in the computer.
Connect the mouse to the computer via the
USB-C adapter included in the set.
The device is not
charging.
Wrong charging cable.
Use the USB-C/A cable included in the set
for charging.
Содержание GM805
Страница 21: ...21...