PM400 Multi-Gas Personal Monitor
REV – 2.0
[34-2900-0206-2 ]
25
|
P a g e
7
Logging
Event logging occurs anytime that an alarm condition is met. Once an alarm condition is met the monitor will
automatically save that event in the memory. The stored log events can be downloaded from your unit and exported
in .XLS format using the PM Link and PC software or
with the Bump Test-Calibration Station
.
The Event Log records the following:
•
Date
•
Time
•
Duration of the event
•
Sensor Readings
•
Alarm Type
•
Serial Number of the Device
The Bump Log records the following:
•
Date
•
Time
•
Audible alarm
•
Sensor Readings
•
Alarm Type
•
Alarm Pass/Fail
•
Serial Number of the Device
The Calibration Log records the following:
•
Date
•
Time
•
Calibration Type
•
Readings for Each Sensor
•
Pass/Fail for Each Sensor
•
Serial Number of the Device
The data log tracks all of the above in addition (but not limited) to:
•
Log Type
•
Firmware version
•
Alarm setpoints
•
Latest Zero calibration date
•
Latest Span calibration date
•
Latest Bump Test date, and more
See the PM Link PC software and Bump Test-Calibration Station manual for more information on Event Log.
