MACROZA M80, Руководство пользователя, Страница: 10 / 24

10
HORIZONTAL CHASES CLOSE TO THE FLOOR
• Horizontal chases close to the floor are done from left to right. (Figure 8)
• Right hand holds the machine by the rear handle and operates the switch. Left hand holds
the milling cutter cover from the left hand side and pushes to the right (Figure 8)
OVERLOAD CIRCUIT
If the milling cutter gets blocked with the wall chaser switched on in model MACROZA
SC200 a red light will lit up and the machine will switched off automatically.
After a few seconds a green light will be lit instead and the wall chaser will be able to carry
on working.
““Correct” ”
figure. 8