Macrovision Corporation M350C MILANO, Руководство пользователя

Страница: 95 / 176

Drivers & Utilities
Windows 2000 Professional 4 - 7
4
Modem (Win2000)
1. Click Start (menu) > Run
...
2. Navigate ( Browse.. ) to
D:\Drivers\Modem\Win2K\Setup.exe and
click OK .
3. Click (button).
4. Click .
5. The modem is ready for dial-up configuration.
Hot-Key (Win2000)
1. Click Start (menu) > Run ...
2. Navigate ( Browse.. ) to D:\Drivers\AP-
KEY\CNK001.exe and click OK .
3. Choose the language you prefer, and click OK .
4. Click Next .
5. Click Finish to restart your computer.
TouchPad (Win2000)
1. Click Start (menu) > Run
...
2. Navigate ( Browse... ) to
D:\Drivers\Touchpad\Win2K_XP\Setup.exe
and click OK .
3. Click Next > Next > Next .
4. Click Finish to restart your computer.
5. You may then configure your TouchPad as
outlined in “Configuring the TouchPad and
Buttons” on page 2 - 20 .
PC Card/PCMCIA (Win2000)
1. Click Start (menu), point to Settings and click
Control Panel . Double-click System (icon)
and then click Hardware (tab) > Device Man-
ager (button).
2. Click Device Manager (tab), then click “ + ”
next to PCMCIA adapters (if its sub-items are
not shown).
3. Double-click Generic CardBus Controller ,
and click the Driver (tab).
4. Click Update Driver (button) > Next .
5. When the Update Device Driver Wizard
appears, click Next (make sure that you have
Modem Country Selection
Be sure to check if the modem country selection is ap-
propriate for you (
Control Panel > Phone and Mo-
dem Options ).