MACROMEDIA COLDFUSION 4.5-ADMINISTRING COLDFUSION..., Руководство пользователя, Страница: 27 / 350

Chapter 1: Installing and Configuring ColdFusion 5
Linux
To install and use ColdFusion Server 4.5 Express, Professional, or Enterprise edition on
Linux, your system must meet the following minimum requirements:
•
RedHat operating system v6.0 or 6.1
(with glibc v2.1, gcc/egcs + v2.9, and v2.2 kernel)
•
Intel Pentium 200 Mhz or greater
•
64 MB of RAM (128 MB recommended)
•
50 MB of free disk space
•
Specific Web servers that work with ColdFusion on the Linux platform include:
•
Apache Web Server versions v1.3.6 or greater
•
A CD-ROM drive
Note
If you plan to use the ClusterCATS software that is included with
ColdFusion to cluster your Linux servers, see “Linux system requirements
for ClusterCATS Server” on page 162. The ClusterCATS system
requirements may impact your overall environment requirements.
Installing ColdFusion on Windows
This section addresses the following topics about installing ColdFusion on Windows:
•
“Verifying that a Web server is running” on page 5
•
“Installing ColdFusion” on page 6
•
“Uninstalling ColdFusion” on page 11
•
“Performing Windows-specific configurations” on page 11
Verifying that a Web server is running
Before installing ColdFusion, check that your Web server is installed and running. You
can do this by loading a page in your Web browser using the HTTP protocol.
To check that your Web server is running:
Do one of the following actions:
•
Enter the URL for a Web page or site in your browser’s Address field and press
Enter.
For example, if the file myindex.htm is in your Web document root directory, load
the page in your browser using the localhost URL:
http://127.0.0.1/myindex.htm
If your Web server is not running, you’ll receive an error message.