MACROMEDIA BREEZE 5, Руководство пользователя

Страница: 26 / 26

26 Macromedia Breeze Edge Server
Here are the basic steps in installing and configuring a cluster of edge servers.
1. Make sure each computer in the cluster meets the hardware, software, and network
requirements, as described in
“System requirements” on page 8 .
2.
Install the Breeze Edge Server license file on each edge server as described in “The Breeze
Edge Server license file” on page 14 .
3.
Configure FCS for each edge server in the cluster, as described in “Configuring FCS for
Breeze Edge Server” on page 14 .
4. If you going to use the secured SSL protocol, configure FCS, as described in “Configuring
FCS for SSL” on page 16 .
5.
Set up a load balancer on the network and configure it to listen on port 80.
■
Consult the vendor documentation for instructions on how to configure the load
balancer.
Scheduling maintenance
Macromedia recommends that you create a weekly scheduled task to clear the edge server
cache.
To create this scheduled task:
1. Create a cache.bat file to delete the cache directory. The entry in this file should have the
following syntax:
del /Q /S <cache directory>\*.*
The default cache directory is C:\breeze\edgeserver\win32\cache\http. The command is:
del /Q /S c:\breeze\edgeserver\win32\cache\http\*.*
2.
Run the cache.bat file and verify that it deletes files in the cache directory.
■
Note that the directory structure remains; this is an expected behavior.
■
Any files currently locked by the edge server are not deleted; this is also an expected
behavior.
3.
Select Control Panel > Scheduled Tasks > Add Scheduled Task.
4.
Select cache.bat as the new file to run.
5.
Macromedia recommends that you schedule the task to run weekly during off hours, such
as early Sunday morning.
6. Replicate this procedure on each installed edge server.