GB-9
SYSTEM SETUP
Touch on the top left position to enter source interface.
The unit will return to previous mode display screen if
any operation is not performed in 5 seconds.
Touch on SET button on the above pic..The user can
start the system setting.
1.SETUP
Touch on the SET button and the screen will display as
following:
2.Audio
Touch on the AUDIO button and
the screen will display as following
In FIG.1, the user can adjust the value of BASS,
TREBLE and SUB WOOFER by tapping on + / - on the
touch screen.
In AUDIO setting, the user can adjust the sound output
effect leftwards or rightwards by tapping
▶
◀
button;
the sound output effect front wards or rearwards by
tapping
▲▼
button.
3.Video
Press on the VIDEO button and the screen will display
as following:
In this setting, the user can adjust the value of
CONTRAST, BRIGHTNESS AND COLOR by tapping on
the items at the left/right end of each value bar.
According to the specific condition, the user can adjust
the light effect on screen by tapping BRIGHT, NORMAL
and SOFT modes.
