- 2 -
• Before final installation, connect the wiring temporalty and make sure it is all working properly.
• Use only the parts included with the unit to ensure proper installation. The use of unauthorized
parts can cause malfunctions.
• This item must be installed by an authorized dealer in order to keep the warranty vaild.
• Install the unit where it does not get in the driver’s way and cannot injure the passenger if there
is a sudden stop, like an emergency stop.
• Avoid installing the unit where it would be subject to high temperature, such as direct sunlight,
or hot air, heater or where it would be subject to dust dirt or excessive vibration.
• Be sure to remove the front panel before installing the unit.
Installation
DIN Mount
Installation the unit
After inserting the half sleeve into the dashboard, select theappropriate tab according to the
thickness of the dashboard material and bend them inwards to secure the holder in place.
1. Dashboard
2. Holder
1
2
Removing the unit
a. Frame
b. Insert fi ngers into the groove in the front of frame and pull out toremove the frame.
(When re-attaching the frame, point the side with a groove down wards and attach it.)
c. Insert the levers supplied with the unit into the grooves at both sides of the unit as shown
in fi gure until they click. Pulling the levers makes it possible to remove the unit from the
dashboard.
a
c
b
M-DL31000BT User manual_ENG_Ver2.0.indd 2
M-DL31000BT User manual_ENG_Ver2.0.indd 2
26/09/2022 09:26:58
26/09/2022 09:26:58
