volume
source
Pairing and connecting with a Bluetooth device
Every time the product is switched on, it will connect to the last connected device automatically.
Switch on the product, the Bluetooth LED lit up in blue, and the pairing sequence starts
after 10 seconds. When ready to be paired the Bluetoot LED blinks red and blue rapidly. The
Bluetooth mode is the default source selection. Than from the Bluetooth function of the
device to be paired search for new device named “M-BTS50”. Select it and if requested enter
“0000” passcode. When pairing is completed successfully the Bluetooth LED is blue and the
product prompts a tone. If the pairing procedure is not successful, please switch off the
product and repeat the above steps. The specific pairing procedure may vary, so please refer
to your device user manual for further information.
Re-connecting with a Bluetooth device
To adjust the volume while listening to music turn
the volume knob. When powered on the product
will maintain the last selected volume level.
Please remember that excessive sound pressure
from speakers can damage your hearing.
Adjust the Volume
-6-
EN
Connecting with a wired audio device
Switch on the product. Connect the audio RCA/
Jack cable provided with the product to the audio
input RCA connectors located on the back of right
speaker. Connect the other end of the cable to an
audio source (i.e. headphone connector ). Press
once the source key on the top of the right speaker.
WARNING
DO NOT OPEN
RISK OF
ELECTRIC SHOCK
Music players
CD / VCD / DVD
Right speaker
SN:
Содержание M-BTS50.B
Страница 1: ...USER MANUAL M BTS50 B M BTS50 W...