Macrom Extreme series, Руководство по установке

Страница: 10 / 12

F l u s h M o u n t i n g
F l u s h M o u n t i n g w i t h r e a r c h a m b e r
These speaker units have been designed spe-
cially for use as part of a car audio system.
Correctly installed they will provide hours of
listening pleasure.
Take care to keep all dirt, metal cuttings and
other debris clear of the speaker during the
installation procedure.
NOTE: These unit is made to be used as a
tweeter in an audio system. NEVER connect it
without using the correct capacitor/condenser/filter when installing these units as part of the
system.
Remove the part where you
need to fit the tweeter and
drill a 59 mm hole in
the requied position.
Insert the Tweeter into the rear chamber and screw it
on the triangle face plate. (connect cable through rear
chamber access and put again the sponge
filter into the rear chamber)
Use the supplied screws (3MAx12)
to fix the face plate on to the desired position.
The rear chamber is designed to increase the excellent performance of the Ex 32tw.
Coupling the tweeter with a large rear air chamber, reduces the resonance frequency
of the tweeter itself and delete the reflection with the woofer.
Remove the part where you need to fit
the tweeter and drill a 59-mm hole in
the required position.
Insert the Tweeter into the back plate
and screw it on the faceplate.
NOTE:
Before screwing the face place, you need to adjust
the sprung steel behind the back plate.
By checking the thickness of the part where you need
to fix the tweeter, adjust the space between the faceplate and sprung, using the screw in the middle
of the back plate.
Extreme
E X T . 3 2 T
WARNING
Do not use the lenses to adjust the angle
of the tweeter in the support.