EN
-5-
Pairing and connecting with a Bluetooth
device
Every time EASY is switched on, it will
connect to the last connected device
automatically and the unit prompts two
tones when is connected. EASY can store
up to 6 different devices. To disconnect a
device press the (
) for 3 seconds.
Power on EASY. The blue LED blinks. From the Bluetooth function of the device to
be paired search for new device named “MACROM EASY”. Select it and if requested
enter “0000” passcode. When pairing is completed successfully the indicator
LED is blue steady and the unit prompts two tones. If the pairing procedure is
not successful, please switch off the unit and repeat the above steps. The specific
pairing procedure may vary, so please refer to your device user manual for further
information.
Re-connecting with a Bluetooth device
To adjust the unit volume while listening to
music press the volume up or down keys.
Adjust the Volume
While EASY is ready for pairing (blue LED
blinks) put in contact the sensitive NFC
area of the device to be paired with the
sensitive NFC area of EASY which is
located right side of the control buttons.
Wait until the connection is established.
Some devices may require a confirmation
for the connection. For more details on NFC
technology, refer to the user manual of the
Bluetooth device to be connected. If the
device does not support NFC, connect the
device in manual mode.
Pairing using NFC (Near Field Communication)
Содержание EASY.B
Страница 1: ...EASY B EASY W USER MANUAL...
