MACOM MAAL-011155, Операция

Страница: 1 / 10

1
1
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DC - 0026742
1
MAAL-011155
Rev. V2
Ultra Low Phase Noise Amplifier
6 - 12 GHz
Ordering Information
1,2
Part Number Package
MAAL - 011155 - TR0100 100 piece reel
MAAL - 011155 - SBM Sample Board
Functional Schematic
Pin Configuration
3. MACOM recommends connecting unused package pins to
ground.
4. The exposed pad centered on the package bottom must be
connected to RF, DC and thermal ground.
Pin # Pin Name Description
1,5,6,8,9,13,15,16 N/C
3
No Connection
2,4,10,12 GND Ground
3 RF
IN
RF Input
7 V
REF
Reference Voltage
11 RF
OUT
RF Output
14 V
CC
Collector Voltage
Paddle
4
GND Ground
* Restrictions on Hazardous Substances, compliant to current RoHS EU directive.
1. Reference Application Note M513 for reel size information.
2. All sample boards include 3 loose parts.
Features
•
Wideband Performance
•
Phase Noise: - 167 dBc/Hz @ 10 kHz Offset
•
Noise Figure: 5 dB @ 6 GHz
•
Bias Voltage: 5 V
•
Bias Current: 90 mA
•
50 Ω Matched Input / Output
•
Positive Voltage Only
•
Lead - Free 4 mm 16 - lead PQFN Package
•
RoHS* Compliant
Applications
•
Test & Measurement, EW, ECM, and Radar
Description
The MAAL - 011155 is an easy to use, wideband ultra
low phase noise distributed amplifier in a lead - free
4 mm 16 - lead PQFN package. It operates from 6 to
12 GHz and provides - 167 dBc/Hz phase noise,
15.6 dB of linear gain, 20 dBm of P1dB, and 5 dB of
noise figure. The input and output are fully matched
to 50 Ω with typical return loss of 16 dB.
The RF output port is DC blocked. Amplifier control
is available through the use of a control circuit.
This product is fabricated using a low phase noise
HBT process which features full passivation for
enhanced reliability.
The MAAL - 011155 can be used as a low noise
amplifier stage for signal generation applications.
This device is ideally suited for Test and
Measurement, EW, ECM, and Radar applications
where ultra low phase noise and drive power is
required.
N/C
RF
IN
RF
OUT
7
1
2
3
4
6 8
11
10
9
14 15
13
5
12
16
N
/C
N
/C
GND
V
cc
GND
N/C
V
R
E
F
N
/C
N
/C
GND
GND
N
/C
N
/C