Maco MULTI, Инструкции по техническому обслуживанию и регулировке

Страница: 5 / 16

- 5 -
MACO
MULTI
Measures to preserve the surface-finish
Protection against soiling:
■ The hardware should be kept free of debris and soiling. Immediately
remove soiling during the building stage caused by plaster, mortar or
similar with water.
■ Protect hardware components from contamination (dust, dirt, paint,
etc.).
Protection against corrosion:
■ Ventilate the hardware and or the rebate areas so that they are not
exposed to direct moisture or condensation (important during the
building stage).
■ Aggressive vapours in conjunction with small formations of
condensation can lead to fast corrosion of the hardware components.
■ Timber frames and sashes with a high concentration of (tannic) acid
must be treated with suitable surface coatings to ensure that these
contents do not evaporate from the timber.
■ No acetic acid or cross-linked acidic sealing compounds or those
with the above mentioned contents may be used.
■ The hardware must not be damaged with sharp edged tools.
■ Clean the fittings with a moist cloth, avoid permanent wetness!
Protection against corrosive, acidiferous cleaning agents:
■ Clean the fittings with a soft, lint-free cloth and a mild, pH-neutral
cleaning agent in diluted form only. Never use aggressive, acidic,
solvent-based or abrasive cleaners (scouring pads, steel wool, etc.).
This can result in damage to the hardware!
■ If hardware is damaged in this manner, it may impair the
function and the safety characteristics. This can result in personal
injury.
Defective or damaged points must be repaired and restored
immediately.
■ We recommend re-treating the cropped edges of TRICOAT-PLUS
fittings with the TRICOAT-PLUS touch-up paint.