TI GE PHY HSMC CARD
Reference Manual - TI GE PHY HSMC CARD
7
© Macnica, Inc.
Warning
(Continued from
previous page)
Plug the power plug securely into the outlet.
If the power plug is not securely plugged into the outlet, it may cause accidents
involving electrical shock or fire due to heat emitted.
Do not connect many electrical cords to a single socket or connect an AC adapter
to an outlet that is not rated for the specified voltage.
Doing so may cause the equipment to malfunction or fail, or lead to accidents
involving electrical shock or fire due to heat emitted.
Periodically remove any dust accumulated on the power plug and around the
outlet (socket).
Do not use a power plug with dust accumulated on it because doing so will lead
to insulation failure due to moisture which may lead to fire.
Remove any dust on the power plug and around the outlet with a dry cloth.
Do not place any containers, such as cups or vases, filled with water or other
liquids on the card.
If the card is exposed to water or other liquids, it will cause a malfunction or
electric shock. If you spilled water or other liquid on this card, immediately stop
using the card, turn off the power, and unplug the power plug. If you have any
requests for repairs or technical consultation, please contact the sales office you
purchased or Mpression inquiry URL.
Keep the card and accessories out of the reach of children. Failure to do so may
lead to injuries.
Caution
Do not place the card on unstable places such as shaky stands or tilted
locations.
Doing so may cause injuries or cause this card to malfunction if the card should
fall.
Do not attempt to use or leave the card in places subject to strong direct
sunlight or other places subject to high temperatures such as in cars in hot
weather.
Doing so might cause the card to emit heat, break, ignite, run out of control,
warp, or malfunction. Also, some parts of the equipment might emit heat,
causing burn injuries.
Do not use the card in places subject to extremely high or low temperatures or
severe temperature changes.
Doing so may cause the card to fail or to malfunction. Always be sure to use the
card within a temperature range of 5°C to 35°C and a humidity range of 0% to
85%.
Unplug the power supply when doing maintenance on equipment in which the
card is embedded.
Failure to do so may lead to accidents involving electrical shock.
Do not place the card in locations where excessive force might be applied to it.
Doing so may cause the printed circuit board to warp, leading to breakage of the
printed circuit board, missing parts or malfunctioning parts.
