TROUBLE
CAUSE
REMEDY
Hose will not fully retract A) Outlet nozzle, gun or tool
A) Add spring tension. See " Adjust Spring Tension"
is too heavy
B) Spring is fatigued
B) Add spring tension. See " Adjust Spring Tension"
Replace Spring canister if required, see "Replacement of Spring Canister"
C) Replacement hose is to long
C) Fit correct length hose (Refer Hose to specifications)
Hose will not retract at allA) Spring has broken or has lost
A) Replace Spring canister. See "Replacement of Spring Canister"
all tension
Reel will not latch
A) Incorrect operation
A) Reel latches on first, second or third "click". After the third click the
reel automatically rewinds
B) Latch assembly is worn.
B) Replace the latch assembly
Fluid leaks from the swivel
A) Swivel seals are worn
A) Replace swivel seals. See " Replacement of Swivel Seals".
4
M o d el
D escrip t io n
Ho se Sp ecif icat io ns
R eel Inlet
Ho se Out let
M ax Op p erat ing
I.D
Leng t h
M ax W o rking Pressure
Thread Size
Temp erat ure
M D TP2 52 0
D IESEL
2 5mm (1" )
2 0 m
3 4 50 kPa (50 0 p si)
i" B SP
1" B SP
8 0 D EG C
M A TP12 2 0
A IR / W A TER
12 .5mm (1/ 2 " )
2 0 m
2 0 70 kPa (3 0 0 p si
1/ 2 " B SP
1/ 2 " B SP
8 0 D EG C
M A TP19 2 0
A IR / W A TER
19 mm (3 / 4 " )
2 0 m
2 0 70 kPa (3 0 0 p si
3 / 4 " B SP
3 / 4 " B SP
10 0 D EG C
M OTP12 2 0
OIL
12 .5mm (1/ 2 " )
2 0 m
6 9 0 0 kPa (10 0 0 p si)
1/ 2 " B SP
1/ 2 " B SP
10 0 D EG C
M OTP19 2 0
OIL
19 mm (3 / 4 " )
2 0 m
6 9 0 0 kPa (10 0 0 p si)
3 / 4 " B SP
3 / 4 " B SP
10 0 D EG C
M GTP0 6 15
GR EA SE
6 mm (1/ 4 " )
15m
3 4 4 50 kPa (50 0 0 p si)
1/ 4 " B SP
1/ 4 " B SP
10 0 D EG C
M GTP0 9 15
GR EA SE
9 mm (3 / 8 " )
15m
2 76 0 0 kPa (4 0 0 0 p si)
3 / 8 " B SP
3 / 8 " B SP
10 0 D EG C
SPECIFICATIONS
TROUBLE SHOOTING GUIDE
Macnaught Pty Ltd
PO Box 90 Arncliffe NSW 2205 Australia
Telephone (02) 9567 0401
Facsimile (02) 9597 7773
Email: [email protected]
Web: www.macnaught.com.au
macnaught warranty
Macnaught Pty Ltd (“Macnaught”) warrants that all products manufactured by Macnaught and/or supplied by Macnaught under the
“Macnaught” brand, excluding M-SERIES, MEC-SERIES and WM-SERI ES positive displacement meters (“Meters”) and components
subject to wear, will be free from any defects caused by fault y materials or workmanship (“Warranty”) for a period of 5 years from the date
of purchase of t he product.
For products (excluding Meters) which carry the “Macnaught design” endorsement, an additional Warranty period of 5 years applies to all
mechanical components (excluding electronic and electrical components), giving a total Warrant y period of 10 years.
For Meters, t he Warranty period is 2 years from the date of purchase of t hat product .
For components contained in all products which are usually subject to wear from normal operation of t he products (such as o-rings, seals,
bushes, springs, hoses and batteries), the Warrant y period is 12 months from the dat e of purchase of the relevant product.
For products and components which are not manufactured by Macnaught and are supplied by Macnaught under a brand name other than
“Macnaught”, the Warranty period is the longer of 12 months f rom the date of purchase of the relevant product and the period of the
manufacturer’s warranty.
The warranties contained in clauses 1, 2, 3, 4 and 5 above are conditional on the purchaser, during the relevant Warrant y period:
delivering to Macnaught a detailed notice sett ing out full details of any defect in any product and details of the date and place of purchase
(together with copies of purchase receipts and/or other supporting documents); and
at the purchaser’s own cost , returning the defective product to t he nearest authorised Macnaught service centre.
Subject to compliance by the purchaser with clause 6, Macnaught shall, at its option, repair or replace any product or component found
defective by it s inspect ion by reason of faulty materials or workmanship of Macnaught.
This Warranty does not cover the failure of product s, parts or components which, in the sole judgment of Macnaught, arises other than
from fault y materials or workmanship of Macnaught, including misuse, abrasion, corrosion, negligence, accident, substitution of non-
Macnaught parts, unauthorised modification, improper use, storage or handling, f aulty installation or tampering by the purchaser or any
third party.
If Macnaught’s inspection discloses no def ect in material or workmanship, repair or replacement and return (at Macnaught’s sole option)
will be made at customary charges, which will be advised to the purchaser.
Macnaught’s liability and the purchaser’s right s under this Warranty shall be limited to t he repair or replacement of defective products or
components and in particular, shall not extend to any direct, special, indirect or consequential damage or losses of any nature.
The foregoing Warranty supersedes, voids and is in lieu of all or any other warranties.
This Warranty does not form part of, nor does it const itute, a cont ract between Macnaught and the end-user or purchaser. It is additional to
any warranty given by t he seller of t he products. This W arranty does not exclude, limit , restrict or modify the non-excludable rights or
remedies conferred upon the end-user or purchaser, or the non-excludable duties or liabilities imposed on the seller or Macnaught , by Part
V, Divisions 2, 2A and Part VA of the Trade Practices Act 1974 (Commonwealth) or ot her legislative provisions. Macnaught otherwise
excludes, t o the extent permitted by law, any right s conferred on the end-user or purchaser or dut ies or liabilit ies imposed upon
Macnaught.
