KP103 Issue19 © 2017
2
FAST FILLING WITH A J3 GREASE PUMP
Note: Select the correct follower position (see Fig 1).
1)
Lock the follower rod (Fig 2).
2)
Slide the filler bleeder valve into the nozzle on the pump
(Fig 4).
3)
Fill with grease until the groove in the rod is visible at
the end of the barrel.
4)
Repeat steps (8), (9), (10) refer (How to bulk Fill).
(Fig 4)
(Fig 5)
HOW TO INSTAL A CARTRIDGE
Note: Select the correct follower position (see Fig 1).
Repeat steps (1) to (2) above
1)
Pull the follower rod back until the rod groove can be
pulled into the barrel slot.
2)
Remove the large end cap from the cartridge.
3)
Slide the large open end first into the barrel.
4)
Remove the small end cap from the cartridge.
5)
Screw the gun body assembly onto the barrel.
6)
Repeat steps (8), (9), (10) as above.
PARTS DIAGRAM
(Fig 6)
