POWER HEAD
BP20-PH
Owners Manual
PLEASE READ THIS SAFETY INFORMATION CAREFULLY BEFORE USE.
Read and retain this instruction manual to assist you in the operation of your new product.
INTRODUCTION
Macnaught has designed and manufactured this pump to the highest quality standards using
premium quality materials and workmanship.
•
DO NOT
use with Charger or Battery if equipment is worn or damaged, (remove from service)
Failure to follow all instructions listed may result in electric shock, fire, serious injury and/or
damage to the power tool. The term “power tool” in all of the warnings listed refers to your battery
operated (cordless) power tool.
POWER HEAD SAFETY WARNINGS
•
DO NOT
use product if the product is damaged or the switch does not turn the pump on.
•
DO NOT
store or use the power tool and battery pack in locations where the temperature may reach
or exceed 40°C/104°F.
•
Only use “ORIGINAL” Macnaught replacement parts, battery or charger
GENERAL SAFETY
•
DO NOT
lift the power head with locking lever. Handle power head with care. DO
NO DROP.
•
Make sure the power head is securely connected/attached to the stem.
•
DO NOT
leave the power head sitting on top of the stem unlocked.
•
Stop operating the pump if any leakings at the joints are noticed.
•
DO NOT
modify the pump in any way.
•
DO NOT
use the product in potentially explosive atmosphere or areas.
•
DO NOT
expose the product to fire and source of heat.
•
Use product in well ventilated area.
•
Only use genuine Macnaught battery and chargers with this product.
•
Only use genuine Macnaught battery and chargers with this product.
BP20-PH-inst-issue2
1
