2
7)
DO NOT
use the power tool if the switch does not turn it on
and off.
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
9) Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other
condition that may affect the power tools operation. If
damaged, have the power tool repaired before use.
Many
accidents are caused by poorly maintained power tools.
8) Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are
dangerous in the hands of untrained users.
10) Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner
intended for the particular type of power tool, taking into
account the working conditions and the work to be
performed.
Use of the power tool for operations different
from intended could result in a hazardous situation.
SERVICE
Have your power tool serviced by a qualified repairperson
using only identical replacement parts.
This will ensure that
the safety of the power tool is maintained.
BATTERY CHARGER SAFETY
Before using charger, read all instructions and cautionary
marking on charger, battery pack, and product using battery
pack.
120/230/240 volts present at charging terminal.
DO NOT
probe with conductive objects - Danger of electric shock or
electrocution.
If battery-pack case is cracked or damaged,
DO NOT
insert
into charger - Danger of electric shock or electrocution.
1) The charger and battery pack is specially designed to
work together.
DO NOT
attempt to charge the battery pack
with any other chargers.
2)
DO NOT
expose charger to rain or snow
.
3)The battery charger
MUST NOT
be used for any other use
than for charging the rechargeable batteries supplied with
the BG100 .
4) To reduce risk of damage to electric plug and cord, pull by
plug rather than cord when disconnecting charger.
5) Make sure cord is located so that it will not be stepped on,
tripped over, or otherwise subjected to damage or stress.
6) An extension cord should not be used unless absolutely
necessary. Use of improper extension cord could result in
risk of fire, electric shock, or electrocution.
6) An extension cord must have adequate wire size (AWG or
American Wire Gauge) for safety. When using more than
one extension, make sure each individual extension
contains at least the minimum wire size
Recommended Minimum AWG Size for Extension Cords
Total Extension cord length (feet)
25ft - 50ft - 75ft - 100ft - 125ft - 150ft - 175ft
Wire Guage
18 - 18 - 16 - 16 - 14 - 14 - 12
14)The charger is designed to operate on standard
household electrical power.
DO NOT
attempt to use it on
any other voltage!
7) The charger is ventilated through slots in the top and the
bottom of the housing.
DO NOT
place any object on top
of charger or place the charger on a soft surface that might
block the ventilation slots and result in excessive internal
heat. Place the charger in a position away from any heat
source.
8)
DO NOT
operate charger with damaged cord or plug -
9)
DO NOT
operate charger if it has received a sharp blow,
been dropped, or otherwise damaged in any way; take it to
an authorized service centre.
10)
DO NOT
disassemble charger; take it to an authorized
service centre when service or repair is required.
11) To reduce risk of electric shock, unplug charger from
outlet before attempting any cleaning. Removing the
battery pack will not reduce this risk.
1
2)
NEVER
attempt to connect 2 chargers together.
13)
DO NOT
store or use the tool and battery pack in
locations where the temperature may reach or exceed
40°C/105°f (such as outside sheds or metal buildings in
summer).
BATTERY SAFETY INFORMATION
NOTE: The battery pack is not fully charged out of the carton!
Fully charge battery prior to first use.
First read the safety
instructions below. Then follow charging notes and proce-
dures.
1) To install the battery pack into the tool handle, align the
base of the tool with the notch inside the tool‘s handle and
slide the battery pack firmly into the handle until you hear
the lock snap into place.
2) To remove the battery pack from the tool, press the release
buttons and firmly pull the battery pack out of the tool
handle.
3) Insert it into the charger as described in the charger section
of this manual.
4)
DO NOT
incinerate the battery pack even if it is severely
damaged or is completely worn out. The battery pack can
explode in a fire.
5) A small leakage of liquid from the battery pack cells may
occur under extreme usage or temperature conditions.
This does not indicate a failure. However, if the outer seal
is broken and this leakage gets on your skin:
a. Wash quickly with soap and water.
b. Neutralize with a mild acid such as lemon juice or
vinegar.
c.If battery liquid gets into your eyes, flush them
with clean water for a minimum of 10 minutes and
seek immediate medical attention. (Medical note: The
liquid is 25-35% solution of potassium hydroxide.)
6)
DO NOT
attempt to open the battery pack for any reason.
If the plastic housing of the battery pack breaks or cracks,
immediately discontinue use and do not recharge.
have them replaiced immediatly.
WARNING
WARNING
Содержание BG100
Страница 6: ...NOTES 6...
