995562 – Revision A
Page
13
of
21
7.5 – Front Castor
In this section it will explain the correct procedure on removing and reinstalling the Front
Castors for servicing procedures or replacement. The below instructions are relevant to both
to both Front Castors.
Removal
Step 1 – Remove the Foot Tray from the product. (Refer to section 7.4)
Step 2 - Place the Transfer Aid on its side for easier service.
Step 3 – Using a 17mm Ratchet Spanner and a 6mm Allen Key, remove the nut and bolt from
the castor to release.
Step 4 – Remove the Castor from the bolt.
Refitting / Replacement
Step 5- Refitting is a reversal of the removal process noting the following points:
A)
Ensure that the bolt is fully secured once tightened while ensuring the Castor is able
to spin freely.
B)
Ensure the Washer is fitted on the underside of the Castor.
