Mackie SWA1801Z, Руководство по ремонту, Страница: 5 / 9

5
Woofer replacement:
1
Follow steps 1-4 of led PCB replacement,
as the front panel will need to be
removed in order to access the woofer.
2
Eight screws need to be removed from
the woofer using the 5mm allen wrench.
3
Keep the eight screws in a safe place.
8
1
2
3
4
5 6
7
4
Carefully begin to remove the woofer. A
fl athead screwdriver may aid in removal
of woofer if it is sticking.
Caution:
The woofer is approximately 27
pounds with weight unevenly distributed.
*
*
This picture was taken during an SWA1501 woofer repair. The same
principle applies to the SWA1801z.