SRM550 • SRM650 • SRM750 P
o
w
er
ed Loudspe
ak
ers
4
SRM550 • SRM650 • SRM750 Powered Loudspeakers
Getting Started
Introduction
SRM 1600W High-Definition Powered
Loudspeakers deliver a new level of SRM ruggedness,
clarity and simplicity with unmatched bass response.
Huge system power is paired with custom transducers
within professional-grade, internally-braced all-wood
cabinets that are “Built-Like-A-Tank”.
These SRM loudspeakers feature our High Definition
Audio Processing
™
, including patented acoustic
correction DSP, plus system optimization tools like
application-specific speaker modes and an amazingly
accurate feedback destroyer.
Ready for anything, the integrated 2-channel mixer
with Wide-Z
™
inputs can handle any signal with ease.
These SRM loudspeakers deliver the high output,
amazing sound and proven durability you demand
for your professional PA system.
How to Use This Manual:
After this introduction, a getting started guide
will help you get things set up fast. The hookup
diagrams show some typical setups, while the
remaining sections provide details of the SRM550,
SRM650 and SRM750 loudspeakers.
This icon marks information that is critically
important or unique to the loudspeakers.
For your own good, read and remember them.
The following steps will help you set up the
loudspeakers quickly.
1. Make all initial connections with the power
switches OFF on all equipment. Make sure the master
volume, level, or gain controls are all the way down.
2. Connect the line-level outputs from the mixing
console (or other signal source) to the inputs on the
rear panel of the SRM loudspeakers.
3. Make sure that the loudspeaker’s gain knobs are set
to (or near) “line”.
4. Connect the supplied AC power cords to the
IEC sockets on the rear panel of each loudspeaker.
Plug the other end into an AC outlet properly configured
with the correct voltage as indicated below the IEC
socket.
5. Turn the mixer (or other signal source) on.
6. Turn the loudspeakers on.
7. Start the signal source and raise the mixer’s
main L/R fader up until audio may be heard
through the loudspeakers.
8. Adjust the master volume of the mixer to a
comfortably loud listening level.
9. Read the rest of this manual to learn how to set the
speaker mode and feedback destroyer to really dial in a
sound for the venue.
Things to Remember:
• Never listen to loud music for prolonged periods.
Please see the Safety Instructions on page 2 for
information on hearing protection.
• As a general guide, SRM loudspeakers should
be turned on last, after any mixer or other signal
source. As such, they should also be turned off
first. This will reduce the possibility of any turn-on
or turn-off thumps and other noises generated
by any upstream equipment from coming out of
the speakers.
• Save the shipping boxes and packing materials!
You may need them someday. Besides, the
cats will love playing in them and jumping out at
you unexpectedly. Remember to pretend like you
are surprised!
• Save your sales receipt in a safe place.
Please write your serial number here for future
reference (i.e., insurance claims, tech support,
return authorization, make dad proud, etc.)
Purchased at:
Date of purchase: