1
For the US 10 V model:
A maximum of five SRM50 vs can be connected per
15A service.
This allows each SRM50 v to be safely operated at
its maximum level.
When setting up for a show, often
you are plugging into an AC power
distribution system you know nothing
about. You may even be faced with -
wire outlets that are missing the third
safety ground pin. It’s a good idea to
have a three-wire AC outlet tester in your toolbox so you
can check the outlets yourself to make sure they are wired
correctly. These testers will tell you if the polarity of the
hot and neutral wires is reversed and if the safety ground is
disconnected.
Don’t use an outlet if it is wired im-
properly! This is to protect yourself as
well as your equipment.
Never remove the ground pin on the
power cord of the SRM50 v or any
other component. This is very danger-
ous.
SRM350
v
2: AC CONNECTIONS
When turning your system on, turn on the SRM50 vs
last. This will stop any turn-on thumps and bangs from your
source equipment being amplified.
When turning off your system, turn off the SRM50 vs
first. This will prevent any turn-off thumps and bangs from
your source equipment being amplified.
DESIGNED BY MACKOIDS IN WOODINVILLE, WA,/ WHITINSVILLES, MA,USA/
SHENZHEN, CHINA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE
COPYRIGHT ©2007 "MACKIE", AND THE RUNNING MAN FIGURE
ARE TRADEMARKS OF LOUD TECHNOLOGIES, INC. • PATENT PENDING.
12k/AIR
100Hz
CONTOUR
(+3dB)
POWER
LIMIT
SIGNAL
LINE
MIC
LEVEL
O
O
+45
+5dB
NORMAL
PA
R
A
LL
E
L
INPUT
THRU
ACTIVE SOUND REINFORCEMENT SYSTEM
CAUTION: REPLACE WITH THE SAME FUSE AND RATING. DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE.
100 - 120V / 50 - 60 Hz 220W
MANUFACTURING DATE
SERIAL NUMBER
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE. DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
AVIS:
RISQUE DE CHOC ELECTRIQUE — NE PAS OUVRIR
THIS DEVICE COMPLIES WITH PART 15
OF THE FCC RULES FOR THE U.S. AND
ICES-003, FOR CANADA. OPERATION
IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
MIC
GAIN
DESIGNED BY MACKOIDS IN WOODINVILLE, WA,/ WHITINSVILLES, MA,USA/
SHENZHEN, CHINA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE
COPYRIGHT ©2007 "MACKIE", AND THE RUNNING MAN FIGURE
ARE TRADEMARKS OF LOUD TECHNOLOGIES, INC. • PATENT PENDING.
12k/AIR
100Hz
CONTOUR
(+3dB)
POWER
LIMIT
SIGNAL
LINE
MIC
LEVEL
O
O
+45
+5dB
NORMAL
PA
R
A
LL
E
L
INPUT
THRU
ACTIVE SOUND REINFORCEMENT SYSTEM
CAUTION: REPLACE WITH THE SAME FUSE AND RATING. DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE.
100 - 120V / 50 - 60 Hz 220W
MANUFACTURING DATE
SERIAL NUMBER
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE. DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
AVIS:
RISQUE DE CHOC ELECTRIQUE — NE PAS OUVRIR
THIS DEVICE COMPLIES WITH PART 15
OF THE FCC RULES FOR THE U.S. AND
ICES-003, FOR CANADA. OPERATION
IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
MIC
GAIN
