24
Step Procedure
Result / Verify
1
Power off the console
n/a (the console is off)
2
Connect MIDI in to MIDI out, connect
pins 2 and 3 on the data port
n/a (you accidentally burn your finger
soldering pins on an old DB9 plug)
3
While powering up, hold down Ultramute
control switches 0, 1, and 2
0, 1, and 2 LEDs light
4
Release switches
Both numeric displays count 0-9, A-F (1-16
hex), all mute LEDs light
5
Individually press all mute switches
(sequence not relevant)
Switch’s corresponding LED shuts off while
switch is depressed
6
Individually press all Ultramute control
switches (sequence not relevant)
Switch’s corresponding LED lights while switch
is depressed (bottom row switches light same
LED’s as top row)
7
Disconnect the MIDI in and MIDI out,
disconnect pins 2 and 3 on the data port
Count on the numeric displays stops (MIDI =
first display, RS-232 = second)
8
Press Ultramute control switches 8 and 9
simultaneously
All mute LEDs flash together
9
Press and hold Ultramute control switches
8 and 9 again
All LEDs off
10
Release switches
System bypass LED on, TEST COMPLETE
ULTRA MUTE SELF TEST PROCEDURE
The following procedure tests the Ultra Mute system. Performing it will not erase any
stored mute groups/scenes.