3-Way Active Sound Reinforcement Speaker System
SR1530
SPEAKER
SR1530
2
O F 6 P A G E S
3-Way Active Sound Reinforcement Speaker System
SR1530
3
O F 6 P A G E S
3-Way Active Sound Reinforcement Speaker System
SR1530
4
O F 6 P A G E S
SR1530 Specifications
System Specifications
Freq. Range:
40 Hz - 20 kHz
Freq. Response (–3 dB):
45 Hz - 18 kHz
Horz. Coverage Angle (–6 dB):
90° averaged 2 kHz to 10 kHz
Vert. Coverage Angle (–6 dB):
40° averaged 2 kHz to 10 kHz
Directivity Factor; DI(Q):
10.77 (11.95) averaged
2 kHz to 10 kHz
Rated Maximum SPL (long term): 123 dB @ 1 m
Rated Maximum SPL (peak):
126 dB @ 1 m
Crossover Points:
700 Hz, 3,000 Hz
Dynamic Range:
>110 dB
Phase Response:
±40° from 500 Hz to 10 kHz
Transducers
Low Frequency:
15-inch (300 mm) diameter
Voice coil diameter:
2.5-inch (63 mm)
Power handling:
250 watts rms (long term)
1
Mid Frequency:
6-inch (152 mm) diameter
Voice coil diameter:
2-inch (50 mm)
Power handling:
60 watts rms (long term)
1
High Frequency
Diaphragm diameter:
1-inch (25.4 mm)
Voice coil diameter:
1-inch (25.4 mm)
Power handling:
25 watts rms (long term)
1
Diaphragm material:
Mylar
Amplifiers
Low Frequency
Burst Capability:
300 watts
Rated THD:
<0.05%
Design:
Class G
High Efficiency-High Current
Mid Frequency
Burst Capability:
100 watts
Rated THD:
<0.1%
Design:
IC Based
High Frequency
Burst Capability:
100 watts
Rated THD:
<0.1%
Design:
IC Based
Audio Input/Output
Input:
Bal./unbal. Female XLR
Loop Out:
Bal./unbal. Male XLR
Input Impedance:
50 k
Ω
balanced
Line Input Power
US :
120 V, 60 Hz
Recommended amperage service: 8 amps
AC Connector:
3 pin IEC-Male
Europe:
230 V, 50 Hz
Recommended amperage service: 5 amps
AC Connector:
3 pin IEC-Male
Control System Functions
Electronic Crossover
Phase Alignment
Time Correction
Equalization
Safety Features
RMS Limiting:
Monitoring and limiting of continu-
ous rms output of amplifiers
Thermal:
Monitoring of thermal condition of
power supply and amplifiers. High
temperature condition engages
input stage shut down and auto
reset function.
Physical
Enclosure:
Trapezoidal 10° side angles,
18 mm multi-layered plywood, top
and bottom high-pressure resin
injected “caps”
Handles:
One on top, one on bottom cap
One three-piece handle on
each side
Color:
Black PVC coated finish
Grille:
Custom perforated oval steel grille
with anti-corrosive treatment
Dimensions
Height:
43.9 in (111.6 cm)
Front Width:
19.1 in (48.4 cm)
Rear Width:
13.9 in (35.2 cm)
Depth:
18.1 in (46.0 cm)
Net Weight:
111.25 lbs. (50.6 kg)
Options
Active Subwoofer System: SWA1501 or SWA1801
1
Note: Power handling for transducers is based on an AES long
term power testing standard conducted for 100 hours full power,
free air.
for additional signal routing. To ensure long term reli-
ability and performance, the amplifiers are mounted
on a massive heat sink, which is convection cooled and
dramatically extends the life expectancy of the heat-
producing components.
The SR1530 cabinet is constructed using both multi-
layered plywood and pressure injected structural resin.
The combination provides a robust enclosure system
with useful ergonomic features. There are three-part
cast aluminum handles on each side of the enclosure
for easy carrying and setup. Handles are located on the
top and bottom of the cabinet for easy movement and
relocation. A full size, oval punched, weather resistant
steel grille protects the front of the cabinet.
(continued from page 1)
