Active, High-Output Subwoofer
FUSSION 1800SA/1800S
SUBWOOFER
FUSSION
1800SA/1800S
oF 6 PAGES
4
O F 4 P A G E S
Architect’s and Engineer’s Specifications
The active subwoofer loudspeaker system shall
incorporate two 18-inch low-frequency (LF) transducers
each mounted within an individual enclosure. Each
enclosure shall be constructed using multi-ply wood
and tuned for optimum low-frequency response. System
frequency response shall vary no more than ±3 dB from
38Hz to 120Hz measured on axis. The loudspeaker
shall incorporate a low frequency amplifier system
capable of delivering 2500 watts over a frequency range
of 20Hz to 150Hz. The amplifier system shall be mount-
ed on an aluminum heat sink suspension mounted
www.mackie.com
16220 Wood-Red Rd NE, Woodinville, WA 98072 USA
888.337.7404, fax 425.487.4337, [email protected]
UK
+44 1268 571 212, fax +44 1268 570 809, [email protected]
ITALY
+39 0522 354 111, fax +39 0522 332 294, [email protected]
FRANCE
+33 3 8546 9160, fax +33 3 8546 9161, [email protected]
GERMANY
+49 2572 96042 0, fax +49 2572 96042 10, [email protected]
Electronic files for this product available at:
www.mackie.com
This Specification Sheet
FUSSION1800.PDF
Architects’ & Engineers’ Specifications
FUSSION1800AE.TXT
Quick-Start Manual
FUSSION1800QS.PDF
Owner/Operator’s Manual
FUSSION1800ML.PDF
Applications Guide
FUSSION1800AG.PDF
CADD files
FUSSION1800.DXF
EASE data
FUSSION1800.EAS
Mackie continually engages in research related to product improvement. New material, production meth-
ods, and design refinements are introduced into existing products without notice as a routine expression
of that philosophy. For this reason, any current Mackie product may differ in some respect from its pub-
lished description, but will always equal or exceed the original design specifications unless otherwise
stated. ©1999-2000 Mackie Inc. All rights Reserved. and are registered trademarks
of Mackie Inc. Mackie is a trademark of Mackie Designs Inc.
part no. 091-226-00
within one of the subwoofer enclosures. Each enclosure
shall have a rectangular shape and shall incorporate
two handles on each side. The subwoofer system will fea-
ture a XLR input connector and a XLR loop-through signal
connector, a speaker-level EP-type connector designed to
power the passive subwoofer cabinet, and “ON” and
“Protection” mode LED indicators. The front of the loud-
speaker shall be covered with a powder-coated, weather-
resistant perforated steel grille.
The active subwoofer loudspeaker system shall be
the Mackie Designs FUSSION 1800SA/1800S.
FUSSION 3000
FUSSION 3000
FUSSION 1800SA
FUSSION 1800SA
FUSSION 1800S
MIXER
FUSSION 3000 High Pass Switch is in the “ON” position
FUSSION 1800S
FUSSION 3000 High Pass Switch is in the “ON” position