O F 8 P A G E S
M•800
High-Current Power Amplifier
AMPLIFIER
M
•8
00
M•800
High-Current Power Amplifier
O F 8 P A G E S
AMPLIFIER
M
•8
00
www.mackie.com
16220 Wood-Red Road NE, Woodinville, WA 98072 USA
800.898.3211, fax 425.487.4337, [email protected]
UK
+44.1268.570.808, fax +44.1268.570.809, [email protected]
M•800
High-Current Power Amplifier
1
O F 8 P A G E S
AMPLIFIER
M
•8
00
O F 8 P A G E S
M•800
High-Current Power Amplifier
AMPLIFIER
M
•8
00
(continued from page 6)
7
limiter on and limiter off. The defeatable electronic limiter
circuit shall sense the onset of clipping and shall limit the
input signal and thereby prevent the output from clipping.
11. LOW-CUT FILTER.
Each channel shall have a low-
cut filter with a variable frequency control appearing on
the rear panel covering a range of 10Hz (OFF) to 170Hz.
12. CONSTANT DIRECTIVITY HORN EQ.
Each chan-
nel shall have a two-way switch appearing on the rear
panel for selecting a constant directivity horn equaliza-
tion circuit. When selected, this circuit shall provide a 6
dB per octave high-frequency boost. The EQ shall have
a variable frequency control appearing on the rear panel
covering a range of 2kHz to 6kHz. The 6kHz position shall
be called AIR.
13. PHYSICAL CONFIGURATION.
The amplifier shall
be rack-mountable with rear support rails for extra sup-
port, and shall have a steel chassis frame painted gray-
black. The amplifier shall be 19" wide (483mm), 3.5" (2U)
tall (89mm), and 15.25" deep (387mm), and shall weigh
36 pounds (16.3 kg).
14. DESIGNATION.
The power amplifier shall be a
Mackie M•800.
