M•1200/M•1400 SERVICE MANUAL
SPECIFICATIONS
6
SPECIFICATIONS
CONTINUOUS AVERAGE OUTPUT
POWER, BOTH CHANNELS DRIVEN:
M•1200
225 watts per channel into 8 ohms from 20Hz to
20kHz, with no more than 0.025% THD
400 watts per channel into 4 ohms from 20Hz to
20kHz, with no more than 0.050% THD
600 watts per channel into 2 ohms from 20Hz to
20kHz, with no more than 0.095% THD
Bridged mono operation:
800 watts into 8 ohms from 20Hz to 20kHz, with
no more than 0.050% THD
1200 watts into 4 ohms from 20Hz to 20kHz, with
no more than 0.095% THD
Maximum Power at 1% THD:
250
watts per channel into 8 ohms
425
watts per channel into 4 ohms
640
watts per channel into 2 ohms
850
watts into 8 ohms bridged
1280
watts into 4 ohms bridged
M•1400 / M•1400i
250 watts per channel into 8 ohms from 20Hz to
20kHz, with no more than 0.012% THD
425 watts per channel into 4 ohms from 20Hz to
20kHz, with no more than 0.025% THD
630 watts per channel into 2 ohms from 20Hz to
20kHz, with no more than 0.050% THD
Bridged mono operation:
850 watts into 8 ohms from 20Hz to 20kHz, with
no more than 0.025% THD
1260 watts into 4 ohms from 20Hz to 20kHz, with
no more than 0.050% THD
Maximum Power at 1% THD:
300
watts per channel into 8 ohms
500
watts per channel into 4 ohms
700
watts per channel into 2 ohms
1000
watts into 8 ohms bridged
1400
watts into 4 ohms bridged
Note
: Power ratings are specified at
120VAC (U.S. and Canada) and 240VAC
(Export) line voltages.
The M•1200/M•1400 power amplifiers draw
large amounts of current from the AC line with
continuous sine wave testing. Accurate
measurement of power requires a steady and
stable AC supply. This means the line
impedance must be very low to insure that the
peak AC line voltage does not sag to less than
97% of its value.
If driving highly reactive loads, we recommend
that the limiter circuit be engaged.
POWER BANDWIDTH:
20Hz to 70kHz (+0, –3 dB)
FREQUENCY RESPONSE:
20Hz to 40kHz (+0, –1 dB)
10Hz to 70kHz (+0, –3 dB)
DISTORTION:
THD, SMPTE IMD, TIM
< 0.025% @ 8
Ω
< 0.050% @ 4
Ω
< 0.150% @ 2
Ω
SIGNAL-TO-NOISE RATIO:
> 107 dB below rated power into 4 ohms
CHANNEL SEPARATION:
> 80 dB @ 1kHz
DAMPING FACTOR:
350 minimum
INPUT IMPEDANCE:
20k balanced bridging
INPUT SENSITIVITY:
1.23 volts (+4 dBu) for rated power into 4 ohms
GAIN:
30.25 dB (32.5V/V)
MAXIMUM INPUT LEVEL:
9.75 volts (+22 dBu)
Содержание FR Series M-1200
