Malström
There are three variations, "Osc/Mod A", "Osc/Mod B" and "Filter" - select by
pressing the Assignment buttons Track, Send or Pan/Surround, respectively.
BV-512 Vocoder
The faders control the band levels - use the Channel Left/Right buttons to select
which vocoder bands to control.
Matrix
Buttons F1-F8 select pattern and buttons F9-F12 select bank. The Select button
for channel 1 controls the Pattern Enable switch.
Mackie C Extender Combo
Requirements/Setting up:
To use the Mackie Control Universal and Extender with Reason , you need to
select the "Mackie Control" mode of operation for both control surfaces:
Hold down the SELECT buttons for Ch 1 and Ch 2 and turn on the first control
surface - you are then asked which mode of operation to use. Select "Mackie Ctrl"
by pressing the corresponding V-Pot.
Repeat this for the other control surface.
You must connect the both control surfaces using two-way MIDI (both MIDI In
and Out should be connected for both surfaces).
Reason will automatically find the Mackie Control and the Extender if you click the
Auto-detect button on the Control Surfaces and Keyboards page in the
Preferences.
Since the program cannot know how you wish to use the auto-detected control
surfaces, this will add four Mackie control surfaces to the list:
Control, Combo - Extender Left, Combo - Extender Right and Extender.
You have to manually tick the “Use with Reason” checkbox for the surface
configuration you wish to use. In this case, select either “Combo, Extender Left”
or “Combo, Extender Right”, depending on whether you have the Extender to the
left or to the right of the Mackie Control.