Mack M359 Скачать руководство пользователя страница 142

Страница: 142 / 332

DRIVING ENVIRONMENT

STORAGE COMPARTMENT

Storage

DANGER

Heavy objects must be stored only in the

outside storage areas or secured on the

floor. Cabinets and storage compartments

are designed for clothing and lighter

personal effects only. In the event of a

collision, heavy, unsecured objects in

overhead storage can come loose and

cause severe personal injury or death to

the driver or passengers.

WARNING

All items within the cab must be secured

before the vehicle is set in motion. This list

includes, but is not limited to, drinks,

clothes, books, televisions, and so on. In

the event of a collision, loose items could

fly around inside the cab. These loose

items could cause personal injury.

CAUTION

DO NOT overload the cab suspension.

Make sure the weight distribution is equal

in the cab. Overloading the suspension

leads to poor ride and lowered driving

comfort.

The overhead storage compartment is

mounted over the windshield. Available

storage areas can have netting, a CB

radio area, switch panels and closed

storage compartments.

Storage weight: 1.1 kg (2.5 lb) per opening. If

evenly distributed, the total storage is 5.6 kg (12.5

lb).

0.6 kg (1.3 lb)

1.35 kg (3 lb)

0.75 kg (1.7 lb)

1.65 kg (3.6 lb)

132

X Publication_PC28

Содержание M359













































































































































































































































































































































Результаты поиска

Содержание M359

Отзывы:

Похожие инструкции для M359

Бренды по названию

Популярные бренды

Mack M359, Руководство пользователя

Результаты поиска

Содержание M359

Отзывы:

Похожие инструкции для M359

Бренды по названию

Популярные бренды