Please check the distance of blades , “ S ” in picture 2 folding shouldn’t exceed
Clamp sheets between upper and base crossbeam , fix the angle localizer in
the left folding axis , turn table-flap to angle localizer , then can fold workpiece
with needed angle .
The machine is using 45° power blade . 45° power blade uses interseeted blade
value stipulated , avoiding to wear power blade . You’d better averagely use
every part of blade , make them wear averagely . During operation , people
mustn’t stand behind the balance hammer , in order to avoid accident . Please
pay attebtion to the station of axes and lubricate situation .
Logical use and servicing
Operation Manual
A Hand folder
Total P4 No P4
Machine operation and use introduction
form . Clients can make different power blade length in term of the workpiece size
and fold different sized chests . Representative folding can be seen below , picture 4 .
picture 4
