MachineryHouse Hafco MetalMaster HM-51B, Руководство по эксплуатации

Страница: 12 / 53

12
OPERATION MANUAL
The unpainted surfaces of the machine have been coated with a waxy oil to protect them from
corrosion during shipment. Remove the protective coating with a solvent cleaner or a citrus
based degreaser.
Optimum performance from your machine will be achieved when you clean all moving parts or
sliding contact surfaces that are coated with rust prevented products.
It is advised to avoid chlorine based solvents, such as acetone or brake parts cleaner, as they
will damage painted surfaces and strip metal should they come in contact. Always follow the
manufacturer’s instructions when using any type of cleaning product.
3.1 CLEAN - UP
3. SETUP
OPTIONS FOR MOUNTING
The machine is best mounted on a concrete slab.
Masonry anchors with bolts are the best way to anchor ma-
chinery, because the anchors sit flush with the floor surface,
making it easy to unbolt and move the machine later, if
needed. (Fig. 3.1)
3.2 SITE PREPARATION
When selecting the site for the machine, consider the largest size of workpiece that will be
processed through the machine and provide enough space around the machine for operat-
ing the machine safely. Consideration should be given to the installation of auxiliary equip-
ment. Leave enough space around the machine to open or remove doors/covers as required
for the maintenance and service as described in this manual.
It is recommended that the machine is anchored to the floor to prevent tipping or shifting. It
also reduces vibration that may occur during operation.
In some case a suitable foundation may not be available
and a new one may need to be prepared.
The foundation should be concrete approximately 300mm
thick with pockets left clear for the hold down bolts.. The
hold down bolts can be “L” shape as per the example in
Fig. 3.2
F
ig
. 3.2
F
ig
. 3.1
08/11/2019 Instructions Manual for HM-54GV (M579) 12