Macherey-Nagel NANOCOLOR Advance, Быстрый старт

Страница: 9 / 146

9 Spectrophotometer NANOCOLOR
®
Advance 1.1, 10.2021
Fig. 1: Remove the interface cover
The spectrophotometer is equipped with an
internal rechargeable battery, which is locked
for transport. To deactivate the locking, the
instrument must be connected to a power
source before it is switched on for the first
time. Fully charge the battery afterwards.
Remove the interface cover on the left side of
the device to connect the power plug (Fig. 1).
A B C D
Fig. 2: Interfaces
Insert the hollow plug of the power supply
unit into the charging socket of the device.
(Fig. 2). Attach the adapter corresponding to
your power connection to the supplied power
supply unit. Connect it to a power source.
A
Charging socket
B
LAN connection
C
USB A interfaces
D
USB B interface
NOTICE
Only the associated power supply GTM96600‑6012‑R2 (REF 919156) may be used.
Step 2: Choose language
Deutsch
English
Nederlands
Português
francais
espanol
italiano
Fig. 3: Setting the language
Switch the device on using the on/off button
below the display.
After a few seconds, the self‑test of the device
starts. The first time the unit is switched on,
it will automatically request the language and
region settings (Fig. 3). Select the desired
language and then the desired region from
the list displayed.
The language can also be changed after
switching on the device via the menu
Settings > Instrument settings > Language .
Step 3: Change the cuvette adapter
WARNING
Danger from contact with chemicals: The cell adapters may be contaminated
after regular use. Use gloves when removing the adapters.