Mach MS 451, Инструкция по установке, обслуживанию и эксплуатации

Страница: 2 / 22

2
Always switch off the appliance at the end of the
work cycle, turn off the water and disconnect the
power supply.
INTRODUCTION
1) Read the instructions in this booklet carefully as they provide important information, use
and maintenance. Keep the booklet to hand in a safe place so that it can be consulted by
other operators.
2) After removing the packing material, check that all the equipment is present and intact.
If there is any doubt, do not use it and contact qualified personnel. The packing elements
(plastic bags, foam polystyrene, nails, etc.) should be kept away from children, because
they are dangerous.
3) Before switching the equipment on, make sure that the model plate data conforms to
that of the electrical and water distribution network.
4) Installation should be carried out by qualified personnel according to the manufacturer’s
instructions.
5) This equipment must be destined to the use which it has been conceived for. Any other
application should be considered improper and consequently dangerous.
6) The equipment should be used by personnel trained for its use only.
7) Do not leave the machine in an environment at temperatures lower than 0°C.
8) The protection of the machine is IPX4, therefore it should not be washed with high
pressure and directed water jets.
9) Qualified personnel only can access the control panel, after having disconnected the
machine from the primary current supply.