Cables/plugs
Red
1
-
1
+
2
+
2
-
IMPORTANT
Note
N
L
Yellow/Green
Blue
Black
1
2
3
G
Cold
Common
Hot
1
2
3
G
Cold
Common
Hot
Hot
Cold
Common
Tip
Ring
Hot
Cold
Common
Tip
Black
Plug wiews from wiring side
Plug wiews from wiring side
2
3
How to connect audio cables and plugs
On the following pages you will find information about how to hook up your M-Flex speakers. To save time and a lot of
sweat and tears please follow these instructions carefully. Before you start make sure that all cables are without damages
and the plugs are clean and dry.
Make sure only to use good quality audio cables, plugs and connectors with the M-
Flex products. When connecting plugs to cables please follow this connection guide
carefully. If there is any doubt about how to connect a specific plug please contact the
supplier.
TS plug (mono)
Standard mono (unbalanced) phone plug, used in the
Line1, Line2, Mix.Out
and most mixer connections.
TRS plug (stereo)
Standard stereo (balanced) phone plug, used in
Line1, Line2, Mix.Out
and for balanced mixer
connections
.
Balanced XLR plug (male)
Standard XLR plug for microphone connector, used
for
Mic In.
Balanced XLR plug (female)
Standard XLR plug for microphone connector, used
for
Mic Link
.
Industrial Connectors / PowerCon®
Locking 3 pole equipment AC connector for 110/250 V
AC. High current capacity (up to 20 A).
Remember to bring the power cord at all times, as the professional PowerCon mains
connector is only available from specialized suppliers.
Installation guide for M•Flex speakers
Speakon®
4 pole cable connector with latch lock. Intermates
with 4-pole chassis connector and makes contact with
+1/-1.