美刚
DW-8P
说明书
- 6 -
①
IEC standard power socket
Connect AC mains through cables goes with products (AC220V~230V,50~60Hz).
②
Power switch
Power turns on when in “I”; Power turns off when in “O”
③
Fuse
Fuse build-in
（
specification
：
diameter 5mm
，
Length 20mm
，
3A
，
250V
）
④
Power LED
Light on when power on, light turn off when power off.
⑤
Low pass filter *
This switch is to chosen to use build-in LOW PASS FIFTER or not, when indicating “FILTER
VAILABLE”, LOW PASS FIFTER is available, can through the switch of
⑦
to select the low pass filter
range.
When indicating “FILTER BYPASS”, the LOW PASS FIFTER is not available, the input signal will direct
input to internal amplifier.
* It is suggested to choose “FILTER BY-PASS” mode when signal is connected to AV receiver’s “LEF”
or “SUB” channel.
⑥
Phase reverse selector
Signal phase reverse switch
：
“
＋
” means normal phase, 0 degree. “
-
” means inverted, 180 degree.
⑦
Build-in low pass filter frequency selector
Frequency selector for Low pass filter, select range 55~125Hz (only available when
⑤
indicates
“FILTER VALIABLE” ).
⑧
Input signal level control *
Input signal level control: level up in clockwise direction, level down in anti-clockwise direction.
* Please choose the appropriate level. To avoid any crack caused by large signal input, it is not
recommended to regulate the level into biggest.
⑨
Signal input RCA socket
Signal input RCA socket , please connect to “L
（
MONO
）
” when using the mono signal.
⑩
Signal output RCA socket
Signal output RCA socket is able to link to another active subwoofer or else.
