Mach CI4, Руководство пользователя, Страница: 10 / 25

8 9
How to install your CI speaker
How to mount the bracket on the wall
To mount the Mach TF bracket on a wall:
1. Find the correct position on the wall and mark where the base of the bracket
should be positioned.
2. Take the bracket and hold the base flat to the wall at the marked position.
Note: the locking button must point upward for correct positioning.
3. Mark each hole with a marking tool or a pencil.
4. Remove the bracket.
5. If using the supplied rawlplugs, drill four holes 40 mm deep using a 6 mm
masonry drill.
6. Insert a rawlplug into each hole.
7. Position the bracket so that the mounting holes align with the holes in the
wall. Note that one cornerhas a recess for the safety wire.
8. Screw the corner og the bracket opposite to the safety wire recess loosely to
the wall.
9. Insert the end loop of the safety wire into recess, push a screw through the
hole and tighten loosely.
10. Align the bracket horizontally.
Insert the last two screws and tighten all 4 screws appropriately.
The bracket has been designed to carry a speaker no larger than the CI8 weighing
no more than 6 kg(13.2 lbs)
Mark each hole with a mark-
ing tool or a pencil If using the supplied
rawlplugs, drill
four holes 40 mm
deep using a 6 mm
masonry drill. Insert the end loop of the safety
wire into its recess, push a screw
through the hole and tighten
loosely.