Mach Alien S51, Руководство пользователя

Страница: 7 / 12

Installation 7
O P E R A T I O N W I T H A V I R O S O U N D S U B
W O O F E R
For additional sub-bass output, the Alien S51 can be supported by the ViroSound
sub woofer. This sub woofer features a stereo amplifier, which enables it to power
two Alien S51s.
Note that only one Alien S51 can be connected to each output channel.
The ViroSound sub woofer can be ordered from your Mach dealer.
I N S T A L L A T I O N
To install the Alien S51:
1 Cut a round hole with a
diameter of 182 mm (7.2 in) in
the panel in which the Alien
S51 is to be installed.
2 If the Alien S51 is being driven
by a:
• Standard amplifier, then set
the switch at the top of the
fixture to the 4 ohm position.
• 100 volt amplifier, then set the
switch to the 100 V position.
3 Run speaker leads from the
a m p l i f i e r t o t h e h o l e a n d
connect the speaker leads to the Alien S51. At this point it is a good idea to turn on
the amplifier and test that sound can be heard from the speaker.
4 Insert the Alien S51 into the mounting hole.
182 mm
182 mm