16
403002-04-05-07-08-09-10_en_ma_201
1
SHARPENING
Models with separate sharpener
1. Clean the blade accurately using denaturized alcohol to degrease it.
2. Turn the graduated knob (1) towards the left to open completely.
3. Remove the sharpener from its box, unscrew the knurled knob and insert the
threaded metallic pin inside the hole (2) provided for on the product tray so that the
two emery wheels are turned towards the blade. Snap into place by pressing on the
lower wheel button (3). The lower wheel must remain inserted for a length equal to
half of its diameter between the blade on which it rests and the adjustment plate.
4. Insert the plug into the outlet and operate the switch while using the handle to block
the product tray then the sharpener in the above position (4);
5. Allow the blade to rotate for about 30 to 40 seconds then use the switch to stop it.
Brush a pencil lightly on the external side of the blade to check for a slight spud;
restart the blade by maintaining the wheel button (5) pressed for 10 seconds.