MACH SYSTEMS MACH-ETH, Руководство пользователя

Страница: 8 / 20

MACH ETH - User Manual
MACH SYSTEMS s.r.o.
www.machsystems.cz
Page 8 of 20
info@machsystems.cz
4.3 LEDs
4.3.1 Power
Green LED is on when the device is powered.
4.3.2 CAN
LED Colour State Description
- Off Channel stopped
Green On Channel started
Green Blinking Activity on TX or RX
Red Blinking Error frame
Red On Error passive
Table 2 CAN Channel LED Description
4.3.3 LIN
LED Colour State Description
- Off Channel stopped
Green On Channel started
Green Blinking Activity on TX or RX
Red Blinking Slave timeout, checksum error,
bus collision, other LIN error
Table 3 LIN Channel LED Description
4.4 Pinout
4.4.1 DSUB connectors
X5 (DSUB9M) Pin Name Note
Front view
1 AI1 0-5 V
2 CAN1_L
3 Gnd
4 CAN2_L
5 Gnd
6 LIN
7 CAN1_H
8 CAN2_H 5V push-pull
9 Vin / Vbat Power input (used for LIN bus, too)
Table 4 Connector X5 - Pin Assignment
X6 (DSUB9M) Pin Name Note
Front view
1 DO1 5 V push-pull
2 -
3 Gnd
4 -
5 Gnd
6 RS-232 TxD out
7 -
8 -
9 RS-232 RxD in
Table 5 Connector X6 - Pin Assignment