Mach Power WL-CPE5G24-063, Руководство пользователя

Страница: 9 / 20

9
c. Enter the password of the AP and click on “APPLY CHANGES”
If you do not open the screen as a picture, check your browser
settings. If the CPE does not find any SSIDs, check that there are
5.8GHz wireless signals
d. In repeater mode, the SSID is disabled in the default settings, it works as a STATION.
To enable the SSID in this mode, edit in the Advanced settings
e. After this step, click on “DEVICE STATUS” to check the status of the CPE, in this
page it will be possible to check the LAN interface, the WLAN status and the signal
strength.