9
ENG
again.
Fog quantity:
This key is used to adjust the fog quantity, which can be divided
into three different positions: large, medium and small cycle control. When the
water level in the tank is lower than the set limit, the machine will start alarm and
sound continuously for 5 seconds. The water-shortage icon will be lit and stop
spraying
Constant humidity:
set the range of 45%-95%RH. When set to the corresponding
value, the current value will be automatically defaults if it is not operated for 3
seconds. When the current humidity reaches the set value, the machine will auto-
matically stop spraying.
Timing:
Set the working time of the spray, set the range of 1-2-4-8 hours, and se-
lect the setting cycle.
Cleaning and maintenance
Please clean the water tank atomizer regularly. Before cleaning, be sure to turn off
the power and unplug it.
External cleaning of the sanitizer:
rinse with a soft, damp cloth to remove surface
stains.
Internal cleaning of the sanitizer:
if there is dirt or limescale in the sanitizer and
in the tank, pour an adequate amount of water and vinegar (ratio 1: 1) to obtain
the cleaning effect. Pay attention to the float when cleaning the tank.
Cleaning the water tank:
if the tank is dirty, pour in an adequate amount of water
and vinegar (ratio 1: 1), dry with a soft cloth and then fill the tank.Common fault
handling
Nota:
Never use rough objects to touch the sanitizer, only with a cotton swab or
soft cloth.Do not clean the surfaces with a cloth soaked in chemical solvents, ga-
soline, kerosene or polishing powder.Do not use detergents to clean the machine,
it is better use clean water. When cleaning, prevent water from entering the devi-
ce, in order to avoid humidity of the internal electrical parts and possible failures.
Do not remove the components of the device.