Mace UL50, Руководство оператора

Страница: 10 / 14

Page | 10
Function tests:
1. Ensure the conveyor is turned on at
power source.
2. Ensure all Emergency stops are out. (Press
reset on control panel if needed)
3. At ground controls; press FWD (3)
– Belt
will move forward.
4. Press STOP (2)
– Belt will stop.
5. Press REV (1)
– Belt will move in reverse.
6. Press STOP (2)
– Belt will stop.
7. Press FWD (3)
– Belt will move forward.
8. Press EMERGENCY STOP (4)
– Belt will
stop.
Note: Once Emergency stop is pressed, the
reset button will need to be pushed to
restart normal function.
7. Repeat process for controls at discharge
control station.