1
SAFETY PRECAUTIONS
Please read before using
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of insulated dangerous voltage within the product’s
enclosure that may be sufficient magnitude to constitute risk of electrical shock.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operation and maintenance (servicing) instructions in the
literature accompanying the appliance.
FCC STATEMENT
WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received including interference
that may cause undesired operation.
* Federal Communications Commission (FCC) Statement
WARNING
This Equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
* You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
• Users should not attempt to disassemble the camera. There are no user serviceable parts
inside. Ask qualified service personnel for servicing.
• Do not use strong solvents or detergents. Use a dry cloth on the camera when it is dirty.
• Before operating, please check proper temperature, humidity and power source ratings.
• Do not aim the camera at bright objects or place it in direct sunlight. This may result in
blooming or smearing.
