10
Mace® LED CCTV Security Surveillance Monitors
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generation, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Precautions
►
Read all of these instructions and save them for later use
►
Follow all warnings and instructions on the product
►
Product
— Do not cover or block the vent holes in the case.
— Do not insert sharp objects or spill liquid into the LED monitor through
cabinet slots. They may cause accident fire, electric shock or failure.
— Disconnect the power plug from the AC outlet if you will not use it for an
indefinite period of time.
— Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltage potentials or other risks.
— Do not touch the screen directly with your fingers. You may damage the
screen, and oil from your skin is difficult to remove.
— Do not apply pressure to the screen. The LED surface is delicate.
►
Power
— Use the type of power indicated on the marking label.
Regulations & Maintenance
6
