1. Introduction
This Quick Start Guide describes the basic installation of the AgriFlo
Series 3. The detailed
“AgriFlo Series 3 Product Manual”
is available for
download from
www.macemeters.com
The AgriFlo Series 3 typically consists of four main components:
• The electronics module
• The sensor(s)
• The solar panel (or power supply)
• Flocom
+
software enabling you to configure and download your
AgriFlo Series 3
Insert Velocity Sensor
Velocity Sensor
Velocity/Depth Sensor
Solar Panel
Electronics Module
LCD Display
Secure Latch
with Padlock
Hole
Membrane Switch
(toggles the display up & down)
ELECTRONICS MODULE - FRONT
Flashing Flow Indicator
NOTE: Door not shown
Conduit Cable Entry Point
Pole Cable Entry Point
12v Battery
Bracket
Charger Input
16-30VDC
(Centre of jack
is positive)
Doppler Sensor Input
External Battery Input
12VDC
(Charged by Series3 Device)
Solar Panel/Charger
Input 16-30VDC
(Use with Solar Panel
or Mains Plug Pack)
Serial Communications Port
ELECTRONICS MODULE - INSIDE
ELECTRONICS MODULE - UNDERSIDE
Controller Module (slot 0)
Module Slots 2-5
Doppler Module (slot 1)
Serial Communications Port
