![background image](http://html.mh-extra.com/html/macdon/r216/r216_unloading-and-assembly-instructions_685779025.webp)
215028
19
Revision A
Chapter 4:
Attaching Rotary Disc Header to M1240 Windrower
4.1
Attaching Header to M1240
4.1.1
Assembling and Installing Forming Shield
Unpack and assemble the forming shield as follows:
1.
Locate and open the included hardware bag.
For headers without the DWA installed:
1030688
A
A
B
B
C
C
B
B
C
C
D
D
Figure 4.1: Setting Forming Shield for Header without
DWA Option
2.
Install shield mount plates (C) on the inside of the
windrower legs.
3.
Install two hex head M12 X 1.75 X 140-8.8 bolts (A),
washers (D), and nuts (C) in the rear holes on the shield
mounting plates. This ensures the forming shield is set at its
lowest setting. The lowest setting is used when there is no
double windrow attachment (DWA).